This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430F67791A: Energy Management Design center

Part Number: MSP430F67791A

Hello team,

Greetings for the day!

I have the following two queries:

I wanted to explore Energy Measurement Design Center(EMDC). Please let me know how do I identify the circuit components required for 3-phase energy meter and why do I need rogowlski coil. It helps, if you could point me to any reference material/ articles that elaborate on EMDC usage for 3-phase energy meter.

Also, how do I configure the XT1 to generate 25MHZ clock frequency and run my UART and SD24_B at 2 MHZ.



**Attention** This is a public forum