This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

EVM430-FR6047: Capturing output of GPM from EVM430-FR6047 to another board Ardunio/NRF

Part Number: EVM430-FR6047

I am using the EVM430-FR6047 board with the clamp-on transducers. I can see the TOF, GPM on the board LCD and also on the US Design Center UI. 

I would like to capture this data out to our processor. I can try out with Ardunio or preferably the NRF52 board. 

Appreciate it if you can help with any related documentation procedure to do so and any sample scripts I can use. 


**Attention** This is a public forum