EVM430-FR6047: EVM430-FR6047 Removing I2C?

Miral Rathod

Part Number: EVM430-FR6047

Hello..

Good day, hoping that all of you are ok, I am Miral From India.

I am in the process of developing a ultrasonic water flow meter using this chip and had few questions.

In your EVM430-6047 kit I2C communication used for communicated With GUI Application.

Communication is not Required For me so Reducing Current Consumption Im not working with I2C,if I2c removed

In EVM430-FR60471 Code so measurement was not Working.

0 Jace H over 1 year ago

Hello,

Our USS library is built with I2C commands to utilize the GUI for development and calibration. We do not offer the library without this functionality. There has been some effort in the past of utilizing UART isntead if you prefer that route. See: https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/919211/evm430-fr6047-how-to-communicate-with-the-uss-design-center-gui-through-uart-instead-of-i2c

0 Miral Rathod over 1 year ago in reply to Jace H

if i Disable I2C communication then error in the USS_runAlgorithmsFixedPoint API and compiler is going in Assembly file how can i remove this Problem

0 Jace H over 1 year ago in reply to Miral Rathod

Hello Miral,

The above guidance is all I can give on the subject. Sorry for the inconvenience.

**Attention** This is a public forum

MSP low-power microcontroller forum