This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Revision marking on MSP430FE427

Other Parts Discussed in Thread: MSP430FE427

Hi,

What does the "Rev E" or "Rev H" marking on the MSP430FE427 signify? (This is the third line marked on the package.).

I have seen both these revisions from the same date code (12 = Feb 2011), which suggests "Rev F" and "Rev G" were skipped.

Joe.

 

  • According to the Errata slaz014f.pdf, Rev E and Rev H use different DIE. But the bug-lists are identical. There is no mention of any other Rev #.

  • Thanks for the lead!

    Page 9 of the above-mentioned Errata also says :

    • Removed slicon revisions G and I from Current Version table; these revisions were not released ........................... 1
    • Removed slicon revisions G and I from Appendix A table; these revisions were not released ................................ 8

    So, it must be that Rev F, G and I were all stillborn.

    Anyway, the important thing for me to know is that this is a _silicon_ revision ...

    Joe.

     

**Attention** This is a public forum