Tool/software:
If I plug one of my MSP-FETs into my Windows 11 PC, it works but I get a "USB Disconnect/Connect" beep every 30s or so.
In Device Manger, if I look at the Event Viewer in Device manager, under Ports(COM & LPT) I can see the MSP Application UART and MSP Debug Interface.
If I then look at the Events tab for the MSP Application UART the information panel states
"Device USB\VID_2047&PID_0014&MI_02\6&48dd2b&1&0002 requires further installation"
and if I then look at the Event Viewer I get an Error listing every 30s for
Device Set Manager Event ID 131 with a description of
Metadata staging failed, result=0x80070490 for container '{3A428A33-54C1-11EF-9375-14755B58C49B}'
If I unplug the MSP-FET, the problem goes away.
Google search suggests this is a Wndows problem awaiting a fix from Microsoft, however, I have other simialr devices that do not cause this problem so are there any any suggestions as to why this specifically happens with a MSP-FET?
A fix would be very gratefully received as it is very annoying.
Thanks
Neil
