This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

how to power cycle the rdk stepper evaluation baord lm3s617

in the example program i had commended the line

  UISerialInit();

 and flash the program to the evaluation board

after that i am not able to acess the GUI and not able to udate the firmware,,

can you help me to come out from this.

please help me to power cycle the board

  • MANOJ G said:

     and flash the program to the evaluation board

    after that i am not able to acess the GUI and not able to udate the firmware,,

    can you help me to come out from this.

     Hi Manoj, here is MSP430 not Stellaris, anyway your update board was from JTAG or bootloader?  If from bootloader I hope you must enter bootloader again, your part has no stellarisware rom so no serial no bootloader too!!!

     Solution can be buy a cheap Stellaris development with JTAG like

    http://www.ti.com/tool/ek-lm3s811

    or better if you think develop User interface panel:

    http://www.ti.com/tool/ek-lm3s8962

     Move to Stellaris thread must be someone know some caveat to bypass but IMHO no other solution than reload firmware by JTAG exist.

     Regards

     Roberto

**Attention** This is a public forum