This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

decoupling capacitor for Msp430g2101

Other Parts Discussed in Thread: MSP430G2101

what kind of decoupling capacitor should be used for Msp430g2101. Please send me complete specification of it



    both agree in 0.1 uF

    Being ignorant (or lucky), I have used can-type polarized 16 V 47 uF just fine - YMMV.

    dangerous prototypes says:

    "Put a 0.1uF decoupling capacitor on each positive supply pin, and put it as close to the chip on your PCB as possible"

**Attention** This is a public forum