This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Flashing MSPF2132 with ez430-rf2500 tool

Other Parts Discussed in Thread: MSP430F2132, MSP430F2131


I'm beginner in using MSP microcontrollers and now I have a question about flashing MSPF2132 with ez430-rf2500 tool.

MSP430F2131 support 2-wire jtag programming, also  ez430-rf2500 support that type onMSP430F20/21/22 series. I got microcontroller MSP430F2132 and I just can't debug program code from CCE v3.1. Pins Vss, Vcc, RST and TEST are connected in right place, but when I want to debug my project, pop-up window say that: "Error connecting to the target:No MSP430 device was found on USB FET 1".

In project propertis I select  "Device variant" and "Linker Command File" to F2132.

Has anybody know what I'm doing wrong?

  • Well, after a coupe of time, I try again with connction and spy-bi-wire programming MSP430F2132 with eZ430_2500. And now I made it. It was prblem on my side, with connector. So flashing series F21x2 work well with eZ430_2500, just like write in Data Sheild.