• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 77 subscribers
  • Views 570 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Interrupt conflict in MSP430G2403

chethu gowda
Genius 4090 points
Other Parts Discussed in Thread: MSP430G2403

I need to use the MSP430G2403 as a bridge of communication which converts UART protocol to I2C protocol to interface two devices

i.e,

                           UART                                             I2C

UART_Device <---------->MSP430G2403 <---------------> I2C_Device

the problem here is both UART (Tx) and I2C(RX/Tx)  are sharing the interrupt vector while both UART(Rx) and I2C(status) are sharing the same interrupt vector.

What can I do with dis situation.

**Attention** This is a public forum