This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

porting freeRTOS on to MSP430FG4619 using CCSv5

Other Parts Discussed in Thread: MSP-TS430PZ100, MSP430FG4619, MSP430F5438


I m trying to port freeRTOS  on to MSP430FG4619  targeting MSP-TS430PZ100 from TI using CCSv5......... 

I am planning to do this by modifying   FreeRTOS demo application for the MSP430F5438 microcontroller (with an MSP430X core) which uses CCSv4, and targets MSP-EXP430F5438 experimenter board from TI . This demo has two folders F5XX_6XX_Core_Lib (corresponding to MSPF5438) and MSP-EXP430F5438_HAL (Target board  MSP-EXP430F5438) as shown in the pic below...

How can I make/ where can I find corresponding folders and files for  MSP430FG4619 and target board MSP-TS430PZ100.?



**Attention** This is a public forum