This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

error in assembly code [E0300] The following symbols

Other Parts Discussed in Thread: MSP430F5507


      I am trying to create a digital filter in msp430 by using the TI FIR_filter_codegen tool.

      I followed the instruction of the tool, but I got an error of [E0300] in line 0. (BTW, where is line 0?)

    Because of the error, the filter cannot work properly.

     The code:

;.include <msp430f5507.h> ;
 .cdecls C,LIST,  "msp430x22x4.h"

         .def FIR_filter ;PUBLIC FIR_filter
        .text ;RSEG     CODE
        .ref input_delay1 ;EXTERN input_delay1
        .ref input_delay2 ;EXTERN input_delay2
        .ref input_delay3;EXTERN input_delay3
        .ref input_delay4 ;EXTERN input_delay4
        .ref input_delay5 ;EXTERN input_delay5
        .ref input_delay6 ;EXTERN input_delay6
        .ref input_delay7 ;EXTERN input_delay7
        .ref input_delay8 ;EXTERN input_delay8
        .ref input_delay9 ;EXTERN input_delay9
        .ref input_delay10,output ;EXTERN input_delay0,output




Thank you!

**Attention** This is a public forum