This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

development of a pulse oximeter using MSP430FG439 microcontroller

Other Parts Discussed in Thread: MSP430FG439

hi,

    my aim is to calculate oxygen saturation and heart rate.im using MSP430FG439 80-pin target board,which consists of pulse oximeter driver circuit and amplifier circuit.It has MSP430FET USB debugger with JTAG connector and USB port in target board.my doubt is how to interface spo2 sensor??that board consists of only JTAG and USB Port.

**Attention** This is a public forum