• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 78 subscribers
  • Views 368 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Is MSP-GANG can support FR4133 program now？

Hanlin Tang
Prodigy 10 points
Other Parts Discussed in Thread: MSP-GANG, MSP430FR4131, MSP430FR4133, MSP430FR4132, MSP430FR2033

Is MSP-GANG can support FR4133 program now？

  • 0
    Guru 74080 points

    Doesn't it support it?

    I don't have one of those but the product overview says:

    Updating the firmware of the programmer should keep the supported mcu list up to date.


    Dennis

  • 0
    TI__Expert 7015 points

    MSP-GANG supports FR4133 from revision v1.1.10.0 which was released in Oct.2014.

    If you go to the home page for MSP-GANG:  www.ti.com/msp-gang, and click on button of "Get Software", you will come to the download page and it will show a description, like Changes in this release. You can see the Changes in different old revision too. For revision v1.1.10.0, you can see following Changes:

    • Added support for devices: MSP430FR4133, MSP430FR4132, MSP430FR4131, MSP430FR2033 and MSP430FR2031
    • Bug fix: 1 per 1000 runs Error 13 / error 15 was shown (Vcc / VTIO is too low)
    • Bug fix: Verification error caused by DCO recalibration for MSP430x2xx devices
    • Bug fix: "Secure Device" selection in pull down menu was enabled when MSP-GANG was in Standalone Mode

**Attention** This is a public forum