This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

eZ430-F2013 as jtag for MSP-EXP430FG4618 Experimenter Board?

Other Parts Discussed in Thread: MSP430F2013, MSP430FG4618

can I use the eZ430-F2013 as jtag for the MSP-EXP430FG4618 Experimenter Board

 

how it can be done

which setting is needed

 

thanks

  • natanel said:

    can I use the eZ430-F2013 as jtag for the MSP-EXP430FG4618 Experimenter Board

    Sorry, natanel, but it will only half-work since the EXP430FG4618 has two processors.  the eZ430s only support Spy Bi-Wire JTAG which isn't available on the MSP430FG4618.  It can, however, work on the MSP430F2013 if you create a custom cable.

     

**Attention** This is a public forum