This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

modifing MSP-EXP430FG4618

I would like to use p6.0 to p6.7 for diffrent usage (header H8).


what should I do?

can it done with out soldering out some reg/cap

or I should solder out those (attached picture).

mic - r29,r30,r32,c21

LPF - r24,r25,c16,c17

jack - r22

is it easy to solder out those or the board is coated.




**Attention** This is a public forum