This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

how to use ccr0 as timer counter and at the same time as pwm function? msp430f2131

Other Parts Discussed in Thread: MSP430G2131

hello !

i'm using the msp430g2131 to controlling 3 pwm outputs :

//               MSP430F23x0
//            -------------------
//        /|\|                          |-
//         | |                          |
//         --|RST          RX |------DATA
//           |                         |
//           |         P1.1/TA0|--> TACCR0
//           |         P1.2/TA1|--> TACCR1
//           |         P1.3/TA2|--> TACCR2
//           |            
//

but at the same time I need   timerA  counts up to CCR0  and goes to isr interrupt to receive data.