The target setup (MSP430F6733) does not match the actual target type (MSP430F6723)

ugra narasimha

Intellectual 460 points

Other Parts Discussed in Thread: MSP430F6723, MSP430F6733

Hi i am ugra,

Every time i debug my program in code composer studio v5 it gave me the following error:

Error connecting to the target:
the target setup (MSP430F6733) does not match the actual target type (MSP430F6723)..

please help me..

over 8 years ago

0 old_cow_yellow over 8 years ago

Guru 58965 points

What target device do you actually use? Is it a F6733, a F6723, or something else?
What target device do you setup CCS in the project? Is it a F6733, a F6723, or something else?

0 Leo Bosch over 8 years ago

Guru 23000 points

In Project properties verify you have selected under ‘Variant:’ MSP430F6723.
Check in the project folder “targetConfigs” if there is only one configuration .ccxml file (for F6723), delete any other .ccxml file.

0 ugra narasimha over 8 years ago in reply to old_cow_yellow

Intellectual 460 points

i am using F6733

0 old_cow_yellow over 8 years ago in reply to ugra narasimha

Guru 58965 points

The only difference between F6733 and F6723 is the number of SDA24. CCS could be mistaken. You may just tell it to continue and see if your code works or not.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

The target setup (MSP430F6733) does not match the actual target type (MSP430F6723)