MSP430 CANBUS implementation

Nick Petrescu67

Other Parts Discussed in Thread: MSP430F5529, MSP430F5521, MSP430F5172

Hello all,

has anyone tried to implement a CANBUS Controller or at least a slave into MSP430, particularly with MSP430F5521 or MSP430F5529?

Thanks

Nick

over 7 years ago

0 huu nho over 7 years ago

Prodigy 55 points

no. That ís not CAN BUS

0 DavidL over 7 years ago in reply to huu nho

TI__Mastermind 25045 points

Hello Nick,

There is a 3rd Party that has a softCAN implementation, please take a look at this post.

e2e.ti.com/.../873940

At the same time I tested this implementation on a MSP430F5172 (F5xx family) and it also works great.

In order to get more information you will have to contact Simma Software directly.

Best regards,

David

0 friedl over 7 years ago

Intellectual 900 points

Have you thought of using the Microchip MCP2515 CAN Controller with SPI Interface?

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430 CANBUS implementation