I have two questions.
- Should I clear REFMSTR bit in REFCTL register when I use LCD Controller with internal reference voltage?
I also want to use ADC10.
I understood REFMSTR must be set at all times when we use ADC10_A according to user guide page 695.
But, in the sample code “msp430f677xA_lcdc_01.c”, REFMSTR is cleared.
2. If the answer of question.1 is “No”, how should I configure registers to generate internal voltage 2.96V in the
sample code “msp430f677xA_lcdc_01.c”?