• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 79 subscribers
  • Views 1072 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR5739: Need help interpreting BOM in http://www.ti.com/tool/TIDM-BATTERYLESSNFCKEYBOARD

Jason Kim31
Prodigy 80 points
Part Number: MSP430FR5739
Other Parts Discussed in Thread: TIDM-BATTERYLESSNFCKEYBOARD, RF430CL330H

Hi.

We are trying to play around with the NFC keyboard design, but we ran into trouble with the BOM.

For example, some of the columns in the BOM in  have different values for capacitance. (See line 2, for example)

Can a kind soul please point us to a valid list of corrected resistances/capacitances?

Secondly, the BOM did not list the actual NFC antenna used in the design. Can someone kindly point us to a manufacturer for the antenna?

Thank you very much.

  • 0
    TI__Guru**** 208757 points
    Hi Jason,

    When creating the Altium schematic the designer used a part with a pre-defined description before changing the value to the correct amount for the specific application, however they never changed the description itself. Therefore the Part Description column is invalid but the Value column has the correct resistances/capacitances and coincides with the provided schematic. I would also recommend that the value of C10 be changed to 470 nF as this is the preferred value from the FR5739 User's Guide. I will see whether the NFC antenna can be provided and if the BOM can be altered to avoid further confusion.

    Regards,
    Ryan
  • 0 in reply to Ryan Brown1
    Prodigy 80 points
    Thank you for the very quick (and useful!!) response!

    How about Line 6? the value column for the resistances is listed as 0. (I assume that can't be the case :-) ?

    Thanks again!
  • 0 in reply to Jason Kim31
    TI__Guru**** 208757 points
    These are simply configuration/jumper resistors that can be opened to break a connection but normally just provide a short/link between traces, therefore the value of 0 ohms is correct.

    Regards,
    Ryan
  • 0 in reply to Ryan Brown1
    TI__Guru*** 133155 points
    Hello Jason,

    There isn't another BOM available for this TI design, what is on that page is all that is provided and nothing more. There is no support available for that particular design (which is 'owned' by the NFC apps team that I am a part of, not MSP430).

    For any BOM elements concerning the RF430CL330H, I would recommend looking at reference designs for that part specifically such as: www.ti.com/.../TIDM-DYNAMICNFCTAG

    For the NFC antenna, any over-the-shelf 13.56MHz antenna would be usable. Again, we don't have information on which one was used specifically.

**Attention** This is a public forum