This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430F1232: Can I use MSP-FET Flash Emulation Tool of TI with MSPFlasher of TI to burn MSP430F1232 ?

Part Number: MSP430F1232
Other Parts Discussed in Thread: MSP-FET, MSP-FLASHER, MSP430-FLASHER

Can I use MSP-FET Flash Emulation Tool of TI with MSPFlasher of TI to burn MSP430F1232 ?

These are tools that I have. According to TI site it should work. But I didn't succeed.

 

If not - what tools do you recommend ? Of TI. Of Elprotronic. 

 

Of course the first option is better for me. 

 

Thanks! 

 

Kara

  • Yes Kara, you can program the MSP430F1232 using the MSP-FET and MSP430-FLASHER. Please make sure your hardware connections follow that of the Hardware Tools User's Guide (SLAU278) Figure 2.1 for a proper JTAG connection, and also verify that you are using the correct arguments/triggers including selecting the proper communication protocol and COM port. If you continue to have trouble then supply a schematic and image of the MSP-FLASHER screen with the error showing.

    Regards,
    Ryan

**Attention** This is a public forum