This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430F6721: JTAG circuit design

Part Number: MSP430F6721

Hi team,

My customer use MSP430F6721 in their project. And their JTAG circuit is just as in the below picture. They don't use pin2->VCC-FET, pin4->VCC-TAR, pin11->RST/NMI. I'm not sure if this kind of connection is OK. So could your give some suggestion? Any comments are highly appreciated.

Thanks & Best regards,

Will