This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR69721: Occur reset issue applyingESD( IEC61000-4-2) test

Part Number: MSP430FR69721

Hi Champ,

When we apply ESD( IEC61000-4-2 immunity test) to MSP430, MCU happen reset .

Actually, this is no damge to MCU. but, we are looking for this reason.  Have you hear such kind of reset issue when you apply ESD test ?  

Here is HW condition

*RSET of HW condition.  Pull up (47Kohm), C (1000pF) that based on Launch pad reference design.

This VCC=2.4V.

 

Regards,

Kz777

**Attention** This is a public forum