The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/MSP430F2471: msp430f2471

Part Number: MSP430F2471

Tool/software: Code Composer Studio

Hi,

I am working with code composer studio version 5 (CCS V5). I am using MSP430- FET programmer when I set a breakpoint and watch the register they are showing unknown in the register window. What might be the problem? Can I know the register contents to debug? 

Regards,

Swaroop.

  • Hi Swaroop,

    While the device is running you cannot view register contents during debug. You need to first ensure the device is stopped either at the breakpoint or by pressing the pause button. Also what registers are you trying to read?

    Best regards,
    Caleb Overbay

**Attention** This is a public forum