Other Parts Discussed in Thread: MSP-GANG
How to select MSP430L092 in MSP-GANG Programmer.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
How to select MSP430L092 in MSP-GANG Programmer.
Hello Alvin,
Thank you for your post. The MSP-GANG production programmer supports both Flash- and FRAM-based MSP devices. The MSP430L092 does not have on-board non-volatile memory (such as Flash or FRAM) and requires external memory for this. Basically, the MSP430L092 is ROM-based and at start-up, it loads the program from the external memory into RAM. Thus, the MSP-GANG does not support this device.
For your reference, we offer a target board for the MSP430L092 with an on-board EEPROM that can be programmed. Please refer to the following resources for more information.
I hope this helped answer your question.
Regards,
James
MSP Customer Applications
**Attention** This is a public forum