This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430L092: How to select MSP430L092 in MSP-GANG Programmer.

Part Number: MSP430L092
Other Parts Discussed in Thread: MSP-GANG

How to select MSP430L092  in MSP-GANG Programmer.

  • Hello Alvin,

    Thank you for your post. The MSP-GANG production programmer supports both Flash- and FRAM-based MSP devices. The MSP430L092 does not have on-board non-volatile memory (such as Flash or FRAM) and requires external memory for this. Basically, the MSP430L092 is ROM-based and at start-up, it loads the program from the external memory into RAM. Thus, the MSP-GANG does not support this device.

    For your reference, we offer a target board for the MSP430L092 with an on-board EEPROM that can be programmed. Please refer to the following resources for more information.

    MSP430L092 Development Guide

    I hope this helped answer your question.

    Regards,

    James

    MSP Customer Applications

  • thanks for your reply.