This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR2110: PWM-Generation with CCR

Part Number: MSP430FR2110

Hi everyone,

I want to use the MSP430FR2110 to generate three independently PWM-signals. In the datasheet it says that the uC has three CRR, but only two of them are directly connected to external pins. Is it yet possible to generate three PWM-signals? Or would one the PWM-signals be significant slower than the other two?

Thank you in advance.

Best regards,

Chris

**Attention** This is a public forum