CCS/MSP430F5255: How to generate TI-TXT file in GCC compiler

Project -> Properties -> MSP430 Hex Utility

(check the box for Enable MSP430 Hex Utility)

Click on Output Format Options

Select TI-TXT from the list.

Hi,

I know that, but here I am not using the MSP430 Compiler. I am using the GNU compiler.

Please guide me how to generate TI-TXT output file in GNU compiler? Please find the attached GNU compiler image for your reference.

Regards,

Vivek

Maybe try the below:

https://e2e.ti.com/support/microcontrollers/msp430/f/166/t/345624

Hi,

I have tried the same, but it is not working. There is no .txt file generated with that procedure.

Hi Mike,

I know that, but here BSL Scripter software itself converts .hex or .txt file to BSL format and same loaded to MSP controller through UART or I2C. But In real time application we must convert the .txt file to BSL file and then only we can able to update the MSP controller through UART or I2C BSL. 

Finally for the end application we must need TI-TXT file for BSL based MSP controller updates. 

So, can you please help us on how to generate the TI-TXT file in GCC compiler or suggest if there is any software that supports to convert the Intel hex file(.hex) to TI-TXT file.

Regards,

Vivek