Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
I'm working on the MSP430F44x. But I've run in to an inconsistency with our IAR workbench.
We wanted to develop on the MSP430F4491, but started with the MSP430F449 because the MSP430F4491 wasn't available yet.
We've now got the MSP430F4491. But by coincidence I found, that the workbench doesn't give any warning if I download to a wrong device, as if it doesn't matter what device I use. I can download to any of the MSP430F44x devices (with the device in use being the MSP430F4491) without any warning.
After an comprehensive mail correspondence with IAR, they now points to the FET driver/dll from TI:
I'm using the LTP FET, for which IAR says only the dll is important. Updating the dll hasn't changed the situation.
Do you now of any solution, or shall I just ignore the missing warnings?
If so, the warning is worthless, as it doesn't provide any safety.