CCS/MSP430G2553: finding the password in the memory

ozgur terzi

Part Number: MSP430G2553
Other Parts Discussed in Thread: MSP430FR2100

Tool/software: Code Composer Studio

I create a four-digit password in memory.When I enter this password with the buttons, if the password is correct, the green led will light.I am looking for a simple software for this.I am looking for a simple code written in CCS.

for example, get the password 1,2,3,4. When I press the number 1234 with the buttons, the green light will light up. Can you help me pls :(

over 6 years ago

0 Andre Frantzke over 6 years ago

TI__Expert 5490 points

Hi,

a general keypad implementation is described in the following application note. http://www.ti.com/lit/slaa139

Please also check out this new TI Tech note demonstrating a Low-Power Hex Keypad Using MSP430™ MCUs such as the MSP430FR2100.

In general the code examples (http://www.ti.com/lit/slac485) of our device show how the different modules work.

Best regards,

Andre

0 Andre Frantzke over 6 years ago in reply to Andre Frantzke

TI__Expert 5490 points

Hi,

do you have further questions? If not, please select "Resolved" in post above so this thread can be closed out.
Thanks a lot!

Best regards,
Andre

0 Andre Frantzke over 6 years ago in reply to Andre Frantzke

TI__Expert 5490 points

Hi,

I suppose that you were able to move on with your application as you didn't reply anymore, so I'll close this post.
Please feel free to comment again if you look for further assistance, it will re-open the thread.

Best regards,
Andre

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/MSP430G2553: finding the password in the memory