MSP430G2333: Need Pin state(floating/High/Low) when powered very first time

Safir Ahamed

Part Number: MSP430G2333

Hi Team,

We are using MSP430G2333 in our project.

Our Software team needs Pin state(floating/ tri state/High/Low) when powered very first time after buying.
We need this detail for all pins.
Please provide as soon as possible.

Regards
Safir Ahamed

over 5 years ago

0 Andre Frantzke over 5 years ago

TI__Expert 5490 points

Hi,

the condition's are described in the User's Guide, in chapter 2.1.2. http://www.ti.com/lit/slau144

As you can see the I/O pins are set to input mode.

Best regards,

Andre

0 Andre Frantzke over 5 years ago in reply to Andre Frantzke

TI__Expert 5490 points

Hi,

do you have further questions? If not, please select "Resolved" for the post that solved your issue so this thread can be closed out.
Thanks a lot!

Best regards,
Andre

0 Safir Ahamed over 5 years ago in reply to Andre Frantzke

Prodigy 50 points

Thank you Andre

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430G2333: Need Pin state(floating/High/Low) when powered very first time