MSP430F2416: MSP430F

Harikrishnan k

Part Number: MSP430F2416
Other Parts Discussed in Thread: MSP430FR5962

Hi,

what is the naming convention for the MSP controllers what is mean by the "F" in MSP430F and "FR" in the MSP430FR5962 controllers?

over 5 years ago

0 Lukas Badura over 5 years ago

TI__Expert 4695 points

Hello Harikrishnan,

F is the FLASH device family, while FR is the FRAM family.

Best regards

Lukas

0 Andre Frantzke over 5 years ago

TI__Expert 5490 points

Hi,

please find below our naming convention:

MSP430F = FLASH as non-volatile memory
MSP430G = FLASH as non-volatile memory (lower cost as less parameters are specified in data sheet)
MSP430FG = FLASH as non-volatile, G was used for blood glucose metering devices

MSP430C = ROM

MSP430FR = FRAM as non-volatile memory

Hope this helps.

Best regards,
Andre

0 Harikrishnan k over 5 years ago in reply to Andre Frantzke

Intellectual 455 points

Hi,
Thank you very much for the answer...

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430F2416: MSP430F