Other Parts Discussed in Thread: MSP430FR2633
Tool/software: Code Composer Studio
Hi,
I use MSP Captivate Dev. Board (msp430fr2633) to research capticate periphery. In file:///C:/ti/CapTIvateDesignCenter_1.60.00.00/CapTIvateDesignCenter/docs/users_guide/html/CapTIvate_Technology_Guide_html/markdown/ch_library.html I found following - "The low power mode may be LPM0 to LPM3. The function returns when all measurements and processing are complete.". But in the document "slas942b.pdf" there is "Table 6-1. Operating Modes" in which is explained that LPM4 mode can be wake-up by IO and also by CapTIvate. I tested one of the example projects with changed LPM3 to LPM4 and it continue to work normally.
Is it error in the web page or I have some mistake in my tests.
Best Regards,
Peter