Other Parts Discussed in Thread: MSP-TS430PM64
I'm doing some testing with the MSP430F417 with the board MSP-TS430PM64. In the LPM3 the current consumed is around 50uA. Is this value correct?
I am measuring the current with the debug mode.
#include <msp430.h> int main(void) { WDTCTL = WDTPW + WDTHOLD; // Stop WDT P1DIR = 0xFF; // All P1.x outputs P1OUT = 0; // All P1.x reset P2DIR = 0xFF; // All P2.x outputs P2OUT = 0; // All P2.x reset P3DIR = 0xFF; // All P3.x outputs P3OUT = 0; // All P3.x reset P4DIR = 0xFF; // All P4.x outputs P4OUT = 0; // All P4.x reset P5DIR = 0xFF; // All P5.x outputs P5OUT = 0; // All P5.x reset P6DIR = 0xFF; // All P6.x outputs P6OUT = 0; // All P6.x reset __bis_SR_register(LPM3_bits); // Enter LPM3 __no_operation(); while(1){ } }