This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/MSP-EXP430FG4618: Setup of CCS for the MSP-EXP430FG4618 via RS232

Part Number: MSP-EXP430FG4618
Other Parts Discussed in Thread: MSP430FG4618, MSP-FET430UIF, MSP430F2013, MSP-FET

Tool/software: Code Composer Studio

CCS can't download the code to the board.

Hi dear friend;
I have just now bought the experimenter's board with  MSP430FG4618/F2013. I'll dowload code without MSP430 FET.  The board supports RS232  and has a 9-pin terminal.  I have tried to download some code from CCS( Version:  by RS232 ; without MSP430 FET.

The connection from the PC to the end of the RS232 is all right, because I can see the reaction (+ and - Pulses) after I have presset " Identify" in the CCS. So I assume,  the selection of the COM PORT and the setting of the UART-Connection are OK.
But CCS can't download the program and the error massage from the Launching Debug Session is: Load failed.

What else have I to do to run the Board? Any suggestion?


**Attention** This is a public forum