MSP430F47187: DLMS Stack porting with MSP430F47187

peeyush tyagi

Part Number: MSP430F47187
Other Parts Discussed in Thread: MSP430F47197

Hi,

we need documentation to use this library.Ti already given a pdf document of DLMS stack but this document does not clarify how we use our parameters and variable with this DLMS library so provide me any document which help me to understand flow of this stack and where we put values and OBIS to access our device data.

secondly we are using MSP430F47187 and stack is for MSP430F47197 so whatever the change in it please share.

over 5 years ago

0 Yiding Luo over 5 years ago

TI__Expert 5490 points

Hello Tyagi,

Thanks for your posting.
We will look into this and get back to you ASAP.

Thanks,
Yiding

0 Yiding Luo over 5 years ago

TI__Expert 5490 points

Hello Tyagi,

I have looped in our expert in the DLMS/COSEM library so that they can contact you with the required materials.

Thanks,
Yiding

0 peeyush tyagi over 5 years ago in reply to Yiding Luo

Prodigy 200 points

Hi ,

still i did not get any response regarding DLMS stack documentation. as i am facing to use this DLMS library.so kindly provide documentation related to DLMS API.

0 Chander G over 5 years ago in reply to peeyush tyagi

TI__Intellectual 2270 points

Dear Peeyush,

The library is provided on no support basis. The documentation which you have has been used by many users who considered it sufficient for kick-starting the development. However, I will try to see how we can support you better.

We will contact you offline.

Regards,

Chander

0 peeyush tyagi over 5 years ago

Prodigy 200 points

Part Number: MSP430F47187

Hi,

i am using Ti DLMS Stack for energy metering.energy meter has load survey and billing data and we do not know where these data use in DLMS API.

i am unable to put values in load profile and billing profile ,kindly give me detail description of these functions so that i can use it.

my metering load profile data is coming in array of 32 bytes so please confirm how these data will be inserted in load profile function.

0 Chander G over 5 years ago in reply to peeyush tyagi

TI__Intellectual 2270 points

Hi Peeyush,

I have contacted you through e-mail. Pls reply.

Regards,

Chander

0 peeyush tyagi over 5 years ago in reply to Chander G

Prodigy 200 points

Hi Mr. Chander,

kindly help to provide description of following API in DLMS stack.

1- load profile capture

2- billing profile

these profile are related to load survey and billing data for energy meter ,we are unable to find out how our data will be inserted in this profile.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430F47187: DLMS Stack porting with MSP430F47187