The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR6989: Water Flow Measurement With Inductive Sensing Reference Design.

Part Number: MSP430FR6989
Other Parts Discussed in Thread: CC1350, TIDA-01228, CSD23285F5, TIDM-LC-WATERMTR

Hi, we have build this reference design from TI http://www.ti.com/tool/TIDA-01228#1 , It works pretty good, we have test it with a signal generator and see the Dampened and the Undampened signal in a osciloscope. This design is recomended to use with the cc1350 Ultra-Low Power Wireless Microcontrolle, but we already have a MSP430FR6989 lauchpad Development Kit, So we are trying to make it work with it.


We have tryed using the FLOWESI GUI but we have no success, can you show us an example to use the TIDA-01228 reference desing with the MSP430FR6989 Laucnhpad.

We are only using one sensor and we are using the CSD23285F5.


Thank you in advance.

**Attention** This is a public forum