Other Parts Discussed in Thread: MSP-FET,
Tool/software: Code Composer Studio
I am trying to unblown the security fuse using BSL_Scripter with MSP-FET Flash Emulator Tool, but I can't get proper response.
The Hardware connection like this:
DVCC ------------->> VCC Target(pin no 4)
DVSS ------------->> GND (pin no 9)
RST/NMI/SBWTDIO ------------->> RST (pin no 11)
TEST/SBWTCK ------------->> TEST (pin no 8)
BSL_TxD (P3.1) ------------->> UART_TxD (pin no 12)
BSL_RxD (P3.0) ------------->> UART_RxD (pin no 14)
Let me know the connection is correct or not? One more question is any change in firmware?
Because in above image ACK_ERROR_MESSAGE unknown _ACK_value.
I wait your response.