Other Parts Discussed in Thread: MSP-FET
URGENT!!!!!
Hi,
We have recently purchased a MSP-FET Flash Emulation Tool from mouser. When I tries to connect to MSP430F4132 through 4 wire JTAG with the help of FET-Pro430 lite, it gives below error:
JTAG communication initialization.... failed
Verifying Security Fuse .................... failed
--------------- FAILED !!! -----------------
=====================================
JTAG communication initialization.... failed
Verifying Security Fuse .................... failed
--------------- FAILED !!! -----------------
=====================================
JTAG communication initialization.... failed
Verifying Security Fuse .................... failed
--------------- FAILED !!! -----------------
When I tried verify Security fuse command it shows below error:
Target Microcontroller is not responding!!!
Please check the connection between the adapter and target microcontroller.
So I have tried to download and debug from IAR workbench, there also no success and shows below error:
Thu Apr 04, 2019 15:31:12: IAR Embedded Workbench 7.12.1 (C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.0\430\bin\430proc.dll)
Thu Apr 04, 2019 15:31:14: Using license: PC-locked license - IAR Embedded Workbench for Texas Instruments MSP430, 8K KickStart Edition 7.12
Thu Apr 04, 2019 15:31:17: Firmware version 3.12.0.0
Thu Apr 04, 2019 15:31:17: Interface dll version 3.13.0.1
Thu Apr 04, 2019 15:31:21: Unknown device : (OpenDevice) , Device=MSP430F4132, PwLength=0
Thu Apr 04, 2019 15:31:24: Fatal error: Could not find device (or device not supported) Session aborted!
Thu Apr 04, 2019 15:31:24: IAR Embedded Workbench 7.12.1 (C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.0\430\bin\430proc.dll)
JTAG 4 wire connection is as shown below:
|
Serial No’s |
14-Pin Connector |
10-Pin Connector |
|
1. |
Pin 1 (TDO/TDI) |
Pin 1 |
|
2. |
Pin 3 (TDI/VPP) |
Pin 3 |
|
3. |
Pin 5 (TMS) |
Pin 5 |
|
4. |
Pin 7 (TCK) |
Pin 7 |
|
5. |
Pin 9 (GND) |
Pin 9 |
|
6. |
Pin 11 (RST) |
Pin 8 (RST/NMI/SBWTDIO) |
|
7. |
Pin 4 (VCC Target) |
Pin 4 |
|
8. |
Pin 8 (Test / VPP) |
Pin 6 (TEST/SBWTCLK) |
Let me know where I am going wrong or how to establish a connection with MSP430F4132 through JTAG 4 wire/2 wire?
