MSP430FR5992: Schematics and Layout verification

Nandhukumar K1

Prodigy 30 points

Part Number: MSP430FR5992

Please find the attached files and kindly review it and let me know the comments.4274.msp.zipPleae

over 4 years ago

0 Wei.Jetim Zhao over 4 years ago

TI__Genius 13215 points

Hi Nandhukumar,

If you have an specific technical issue or question, please post your issue or question. But I will not suggest to send your schematics and layout directly for reviewing on E2E forum without any issue or question.

0 Wei.Jetim Zhao over 4 years ago

TI__Genius 13215 points

BTW, you could take the chapter 7 Applications, Implementation, and Layout of the device datasheet for common guides about the hardware design.

0 Nandhukumar K1 over 4 years ago in reply to Wei.Jetim Zhao

Prodigy 30 points

Dear Wei.Jetim Zhao,

Thank you for your response.I just routed some signal lines through under the thermal pad and thermal vias ,is that ok.

0 Wei.Jetim Zhao over 4 years ago in reply to Nandhukumar K1

TI__Genius 13215 points

Hi,

That should be the common guideline of layout, which is not specific for MSP430. But where are the signal lines you mentioned on the screen shot you are showing? I would like to give you a quick checking if you could tell me detailed information.

0 Wei.Jetim Zhao over 4 years ago in reply to Nandhukumar K1

TI__Genius 13215 points

Hi

I haven’t heard from you for about 1 week, so I’m assuming you were able to resolve your issue. If this isn’t the case, please click the "This did NOT resolve my issue" button and reply to this thread with more information. If this thread locks, please click the "Ask a related question" button and in the new thread describe the current status of your issue and any additional details you may have to assist us in helping to solve your issues.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR5992: Schematics and Layout verification