This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430F2418: UART driver for MSP430F2418

Part Number: MSP430F2418

I am trying to develop a driver for UART module, How to configure the USCI_A1 modulation control register with clk_rate of 8MHz and baud rate of 9600.

Do i need to configure the Clock source also or just i need to configure the UCSSELx bits in the UCA1CTL1 register?

I am struggling. Please help

**Attention** This is a public forum