Other Parts Discussed in Thread: MSP-FET, , UNIFLASH
Tool/software: Code Composer Studio
Is it possible to upload the burnt program from microcontroller MSP430FG4618 using MSP-FET USB flash emulator?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software: Code Composer Studio
Is it possible to upload the burnt program from microcontroller MSP430FG4618 using MSP-FET USB flash emulator?
Hi Keerthi
You use the MSP-FET to read the memory of your JTAG is not locked. There are different PC software tool to use I often use the Uniflash. You can get it here
http://processors.wiki.ti.com/index.php/Category:CCS_UniFlash
Best regards
Gary
**Attention** This is a public forum