• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 78 subscribers
  • Views 422 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430F5514: About vendor ID at USB BSL

Tao_2199
Genius 5660 points
Part Number: MSP430F5514
Other Parts Discussed in Thread: MSP430USBDEVPACK

Hello,

 

Regarding to vendor ID on MSP430F5514, my customer is asking a question.

They will change vendor ID at USB BSL dynamically on their application.

PC: customer ID <= (USB) => MSP430: TI unique ID

I’m not sure why they need to change vendor ID at USB BSL.

(Question)

According to application note(SLAA452C) , if it is necessary to change the BSL VID/PID to a different unique value,

the change must be made in three locations (host application/ flash BSL/ RAM BSL).

But it needs to build and recompiling for value change. In this case, it can’t be changed dynamically.

Can it change vendor ID at USB BSL dynamically on MSP430 with other method?

(PC: customer ID <= (USB) => MSP430: TI )

 

Regards,

Tao 2199

**Attention** This is a public forum