MSP430F5328: NC Pins

Paul Landini

Prodigy 145 points

Part Number: MSP430F5328

Hi,

Should the NC pins of the MSp430F5328 be left floating or should they be grounded?

Thanks

over 4 years ago

0 JD Crutchfield over 4 years ago

TI__Mastermind 26420 points

Hey Paul,

Since the datasheet doesn't specify, I would recommend leaving them floating. Typically, these pins are just part of the package and have no actual connection to the silicon.

Another thread on this topic can be found here: https://e2e.ti.com/support/microcontrollers/msp430/f/166/t/833361

Thanks,

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430F5328: NC Pins