TIDM-SERVER-PWR-MON: Porting code to IAR 7.1

SelvaKumaran R

Part Number: TIDM-SERVER-PWR-MON
Other Parts Discussed in Thread: EVM430-I2040S

Hi Team,

I am trying to port the existing code to IAR 7.1 and followed the document in the below post. Still I am not able to get through and got struck with linker error. can you please help in fixing the same.

over 4 years ago

0 James Evans over 4 years ago

TI__Mastermind 49692 points

Hello,

Unfortunately, this code base has limited support moving forward and will be removed from the web eventually. We recommend that you switch to the Energy Measurement Design Center (EMDC) GUI and software library for MSP430i20xx. The EMDC library supports both CCS (it's free) and IAR now whereas the legacy library that you're referring to only supported IAR. EMDC supports your EVM430-i2040S, so you can start evaluating the metrology performance.

Accelerate your metering design with the new Energy Measurement Design Center and software library for MSP430™ MCUs

Energy Measurement Design Center for MSP430 MCUs

[FAQ] MSP-EM-DESIGN-CENTER: Can the Energy Measurement Design Center (EMDC) measure DC voltages and currents?

Regards,

James

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

TIDM-SERVER-PWR-MON: Porting code to IAR 7.1