This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/MSP430F5522: Could not add UART debug messages in bootloader code

Part Number: MSP430F5522

Tool/software: Code Composer Studio


We are trying to add debug messages via UART in bootloader of MSP430F5522 but we are unable to succeed. Compilation is done successfully but while flashing,, we didn't get the debug messages in output. So, could you please share functional UART code with debug messages in bootloader.


**Attention** This is a public forum