MSP430G2533: code porting from G2403 to G2533

Ryo Akashi

Expert 8940 points

Part Number: MSP430G2533

Dear experts,

I got question about code porting from G2403 to G2533.

My customer want to port the code (which is used for G2403) to G2533.

Is it possible?

From datasheet, pin location is same G2533 and G2403.

I would appreciate if you would give me comment.

Thanks and best regards,

Ryo Akashi

over 3 years ago

0 Lixin Chen1 over 3 years ago

TI__Expert 7015 points

Hi, Ryo,

G2403 has less flash memory size (8kB) than G2533 (16kB), and G2403 has no ADC but G2533 has ADC. This is the only difference between them.

If your customer doesn't use the ADC and the code size is less than 8kB. With the same package, it is no problem to port the code from G2533 to G2403.

Thanks,

Lixin

0 Ryo Akashi over 3 years ago in reply to Lixin Chen1

TI__Expert 8940 points

Hello Lixin-san,

Thank you for your reply.

I understand we can port the code from G2403 to G2533.

Thanks and best regards,

Ryo Akashi

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430G2533: code porting from G2403 to G2533