CCS/MSP430F2370: GIE get cleared during program step under debug

Mihail Trosinenco

Part Number: MSP430F2370

Tool/software: Code Composer Studio

Hi,

I use MSP43F2370 with MSP-FETFlash Emulation Tool.

I figured out that GIE gets cleared during program step execution under debug. As I searched at TI e2e forum this problem long time exists. I downloaded latest CCS10 with MSP Debug Stack and problem still exists.

Any help?

over 3 years ago

0 Eddie LaCost over 3 years ago

TI__Mastermind 38590 points

Hello MIhail,

See the thread below. It looks like you can disable that option in the debug settings.

https://e2e.ti.com/support/microcontrollers/msp430/f/166/t/742194?Compiler-MSP430G2955-GIE-is-disabled-automatically-when-step-debugging

0 Mihail Trosinenco over 3 years ago in reply to Eddie LaCost

Prodigy 205 points

Hi Eddie,

I checked boxes:

Project Properties -> Debug -> Program/Memory Load Options -> Disable Interrupts->When assembly stepping

Project Properties -> Debug -> Program/Memory Load Options -> Disable Interrupts->When source stepping

with no success(((

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/MSP430F2370: GIE get cleared during program step under debug