• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 78 subscribers
  • Views 367 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC evaluation board with USB (with SPI) interface

Anum Pirkani
Expert 2005 points
Other Parts Discussed in Thread: ADS7066EVM-PDK

Hello, 

I am looking for a suggestion in selecting a suitable ADC evaluation kit with a USB (with SPI) interface. I would prefer having a 16bit ADC.

I want to perform some real-time processing with a signal and am planning to do it through this board.

Any guidance/suggestions in this matter would be useful.

  • 0
    TI__Guru**** 174620 points

    Hi Anum,

    Most of our evaluation modules have some sort of USB interface to get data  into the PC.  We usually have a two board setup where there is a host controller and an EVM that talk together and then use one of our GUIs to display performance details (THD, SNR, etc.).  Take a look at the ADS7066EVM-PDK for an example.

    If you are looking for an ADC and SPI and a USB interface all in one package, the closest thing you will find is in the MSP430 microcontroller family of devices.

**Attention** This is a public forum