This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP432P401R: NVS Internal Region Base Address for an OTA application.

Part Number: MSP432P401R

Hello There,

I'm working on an OTA based application where custom bootloader lies from 0x00000000 and main application lies from 0x00008000.

I'm also using spiffs internal with the application. So what NVS Base region I should use for this. So, that the users spiffs data could be retained even after updating the main firmware from custom bootloader.

Regards,

Keshav Aggarwal

**Attention** This is a public forum